If you have recently upgraded your Motorola Xoom to Honeycomb 3.1 than you will have many chances to lose root Access on your Tablet. However, you can follow these simple instructions to root Motorola Xoom on Honeycomb 3.1.
ADB Setup should be properly configured on your PC for its proper usage.
WiFi_RootTool_3.1 Download here
Instructions:Download WiFi Root Tool 3.1 and copy it to the root of your SD Card.
USB Debugging mode should be enabled before you proceed, to do this go to
“Settings > Applications > Development > check the USB Debugging Mode”
Launch Command Prompt and run the following commands:
adb reboot bootloader
fastboot flash recovery recovery-solarnz-XXX-XXX.img
fastboot reboot
When the last command is given, you Motorola will be rebooted. And you will see Motorola Logo appearing for 5 seconds and here Press the Volume down Button.
Your Device will be rebooted in recovery mode.
Select “catch the boot” it says ‘Starting Fastboot protocol support’ then you hit Volume Down too soon. Hold Vol UP + Power to reboot and try again
Now your Device will be in the Clock Work Mod recovery, and here select the “install zip from sdcard” option and then “WiFi_RootTool_3.1.zip” option to select the file and choose “Yes – Install WiFi_RootTool_3.1.zip” to proceed for the installation process after which choose the option of “Reboot System Now” to reboot the Xoom.
So, Finally you have successfully rooted your Motorola Xoom Tablet on Android Honeycomb 3.1.

{ 0 comments... read them below or add one }
Post a Comment
Are you have Any Suggestions? please add here... But Don't Spam here :)